ZIVAN NG3 48V 60A CARGADOR ALTA FRECUENCIA
937,00 €
NG3 – Cargador de Baterías Monofásico
- Voltaje de alimentación: 230+- 10% VAC
- Frecuencia de entrada: 50-60 Hz
- Rendimiento: >85%
- Mínima potencia absorbida: <5W
- Corriente absorbida de la batería: <0.5 mA
- Temperatura de funcionamiento: -20ºC a +50ºC
- Protección contra cortocircuito de salida (fusible)
- Protección contra inversión de polaridad (fusible)
- Curva de carga seleccionable
- Compensación térmica de la tensión de batería (opción con sonda)
- Indicador acústico de alarma
- Precisión sobre la tensión de salida: +-0,5%
- Ventilación forzada
- Contactos auxiliares de presencia de red y final de carga (cargador standard) o del control de la bomba de aire y final de carga (cargador con bomba de aire)
- Carcasa: base metálica, tapa en PTS
- Tamaño máximo: 430 x 220 x 90 mm
- Peso: 5,5 Kg
- Protección: IP20
TIEMPO DE CARGA
V | 7-8,5 h | 9-11 h | 12-13 h | Modelo | Tipo | I1 | IMAX | CODIGO | VAC | RED |
48 | 240-360A | 400-480A | 520-560A | NG3 | 48V 60A | 50A | 60A | F7EQMW-00020Q | 230 | 22 |
NG3 – Battery Charger single-phase
NG3 – Download the info sheet in PDF format.
Requires Acrobat™ Reader and a ZIP utility.
NG3 CANBUS – Download the info sheet in PDF format.
Requires Acrobat™ Reader and a ZIP utility.
Every model is available for air lift batteries (please, allocate the correct code in the Purchase Order ).
Further models are available for other battery voltages.
Air pump NG3p
Technical Features
- Input Voltage: 230 VAC ± 10% 115 VAC ± 10 %
- Input frequency: 50 – 60 Hz
- Efficiency: > 85 %
- Minimum power absorbed: < 5 W
- Current absorbed by the battery: < 0,5 mA
- Operating temperature: from –20 to+ 50 °C
- Output short-circuit protection (fuse)
- Inverse polarity protection (fuse)
- Charging curve: programmable
- Accuracy on output voltage: ± 0,5 %
- Thermal compensation of battery voltage
(optional with thermal sensor ) - Acoustic alarm
- Auxiliary contacts of main presence and end of charge
(Standard Charger) or of air pump control and end of charge
(Charger with air pump) - Cooling: forced
- Case: Metal base, cover in self-extinguishable PST
- Size: 430 x 220 x 110 mm
- Weight: 5,5 kg
- Enclosure class: IP20
- In conformity with the requirements of the Low
Voltage Directive and of the Directive EMC.
Main charging curves
More and different charging curves are available for special batteries
and non-standard applications.
Accessories NG3 – Battery Charger single-phase
cod. P14004 – 300 cm KIT LED EXTENSION d 10, – Displays the charging phase of the Charger (fixing hole d 14mm). |
cod. P13003 – 200 cm cod. P13007 – 400 cm REMOTE INDICATOR d 20, – Displays the Charging phase of the Charger (fixing hole d 22 mm). |
cod. P13005 – 200 cm cod. P13013 – 500 cm (standard) cod. P13005A – 10 m THERMAL SENSOR – Controls the constant voltage of the gasification phase, depending on the battery temperature. |
cod. P13004 – 200 cm cod. P13004A – 10 m THERMAL SENSOR AND REMOTE INDICATOR d 20, (fixing hole d 22 mm). |
cod. P14000 CABLES PASSAGE BEARING – Allows an appropriate wall installation, thanks to an adequate passage of the cables behind the Charger. |
cod. P14009 – 200 cm THERMAL SENSOR AND LED INDICATOR d 10, (fixing hole d 14 mm). |
cod. Z-C14587 ROLL BAR |
Reviews
There are no reviews yet.