ZIVAN NG5 24V 120A CARGADOR ALTA FRECUENCIA TRIFÁSICO
1.585,00 €
NG5 – Cargador de Baterías Trifásico
- Voltaje de alimentación: 400+- 15% VAC
- Frecuencia de entrada: 50-60 Hz
- Rendimiento: >87%
- Mínima potencia absorbida: <10W
- Corriente absorbida de la batería: <0.5 mA
- Temperatura de funcionamiento: -20ºC a +50ºC
- Protección contra cortocircuito de salida (fusible)
- Protección contra inversión de polaridad (fusible)
- Curva de carga seleccionable
- Visualización de V/I a través del display digital
- Compensación térmica de la tensión de batería (opción con sonda)
- Indicador acústico de alarma
- Precisión sobre la tensión de salida: +-0,5%
- Ventilación forzada
- Contactos auxiliares de presencia de red y final de carga (cargador standard) o del control de la bomba de aire y final de carga (cargador con bomba de aire)
- Carcasa: base metálica, tapa en ABS
- Tamaño máximo: 550 x 270 x 120 mm
- Peso: 9 Kg
- Protección: IP20
TIEMPO DE CARGA
V | 7-8,5 h | 9-11 h | 12-13 h | Modelo | Tipo | I1 | IMAX | CODIGO | VAC | RED |
24 | 480-720A | 800-960A | 1040-1120A | NG5 | 24V 120A | 100A | 120A | G8BVMW-C40D0Q | 400 | 7 |
NG5 | NG7 | NG9 – Battery Charger three-phase
NG5 | NG7 | NG9 Plus – Download the info sheet in PDF format.
Requires Acrobat™ Reader and a ZIP utility.
NG5 | NG7 | NG9 CANBUS – Download the info sheet in PDF format.
Requires Acrobat™ Reader and a ZIP utility.
Every model is available for air lift batteries (please allocate the correct code in the Purchase Order).
Further models are available for other battery voltages.
Technical Features
- Input voltage: 400 VAC ± 15% Three Phase
- Input frequency: 50 – 60 Hz
- Efficiency: > 87 %
- Minimum power absorbed: < 10 W
- Current absorbed by the battery: < 0,5 mA
- Operating temperature: from – 20 to + 50 °C
- Output short-circuit protection (fuse)
- Inverse polarity protection (fuse)
- Charging Curve: programmable
- Visualization V/I with digital display
- Accuracy on output voltage: ± 0,5 %
- Thermal compensation of battery voltage
(optional with thermal sensor) - Acoustic alarm
- Auxiliary contacts of main presence and end of charge
(Standard Charger) or of air pump control and end of charge
(Charger with air pump) - Cooling: forced
- Case: Metal base, cover in self-extinguishable ABS
- Size: 545 x 265 x 115 mm
- Weight: 9 kg
- Enclosure class: IP20
- In conformity with the requirements of the Low
Voltage Directive and of the Directive EMC.
Main charging curves
More and different charging curves are available for special batteries
and non-standard applications
Accessories NG5 | NG7 | NG9 – Battery Charger three-phase
cod. P14004 – 300 cm KIT LED EXTENSION d 10, – Displays the charging phase of the Charger (fixing hole d 14mm). |
cod. P13003 – 200 cm cod. P13007 – 400 cm REMOTE INDICATOR d 20, – Displays the Charging phase of the Charger (fixing hole d 22 mm). |
cod. P13005 – 200 cm cod. P13013 – 500 cm (standard) cod. P13005A – 10 m THERMAL SENSOR – Controls the constant voltage of the gasification phase, depending on the battery temperature. |
cod. P04001 CABLE HOLDER FRAME AIR PUMP KIT |
cod. P13004 – 200 cm cod. P13004A – 10 m THERMAL SENSOR AND REMOTE INDICATOR d 20, (fixing hole d 22 mm). |
cod. P14009 – 200 cm THERMAL SENSOR AND LED INDICATOR d 10, (fixing hole d 14 mm). |
cod. P04509 STAND – A support to place the Charger on the ground. |
cod. P14000 CABLES PASSAGE BEARING – Allows an appropriate wall installation, thanks to an adequate passage of the cables behind the Charger. |
cod. Z-C14587 ROLL BAR |
Valoraciones
No hay valoraciones aún.