ZIVAN NG3 36V 60A CARGADOR ALTA FRECUENCIA
937,00 €
NG3 – Cargador de Baterías Monofásico
- Voltaje de alimentación: 230+- 10% VAC
- Frecuencia de entrada: 50-60 Hz
- Rendimiento: >85%
- Mínima potencia absorbida: <5W
- Corriente absorbida de la batería: <0.5 mA
- Temperatura de funcionamiento: -20ºC a +50ºC
- Protección contra cortocircuito de salida (fusible)
- Protección contra inversión de polaridad (fusible)
- Curva de carga seleccionable
- Compensación térmica de la tensión de batería (opción con sonda)
- Indicador acústico de alarma
- Precisión sobre la tensión de salida: +-0,5%
- Ventilación forzada
- Contactos auxiliares de presencia de red y final de carga (cargador standard) o del control de la bomba de aire y final de carga (cargador con bomba de aire)
- Carcasa: base metálica, tapa en PTS
- Tamaño máximo: 430 x 220 x 90 mm
- Peso: 5,5 Kg
- Protección: IP20
TIEMPO DE CARGA
V | 7-8,5 h | 9-11 h | 12-13 h | Modelo | Tipo | I1 | IMAX | CODIGO | VAC | RED |
36 | 240-360A | 400-480A |
520-560A |
NG3 | 36V 60A | 50A | 60A | F7CQMW-00020Q | 230 | 16 |
NG3 – Battery Charger single-phase
NG3 – Download the info sheet in PDF format.
Requires Acrobat™ Reader and a ZIP utility.
NG3 CANBUS – Download the info sheet in PDF format.
Requires Acrobat™ Reader and a ZIP utility.
Every model is available for air lift batteries (please, allocate the correct code in the Purchase Order ).
Further models are available for other battery voltages.
Technical Features
- Input Voltage: 230 VAC ± 10% 115 VAC ± 10 %
- Input frequency: 50 – 60 Hz
- Efficiency: > 85 %
- Minimum power absorbed: < 5 W
- Current absorbed by the battery: < 0,5 mA
- Operating temperature: from –20 to+ 50 °C
- Output short-circuit protection (fuse)
- Inverse polarity protection (fuse)
- Charging curve: programmable
- Accuracy on output voltage: ± 0,5 %
- Thermal compensation of battery voltage
(optional with thermal sensor ) - Acoustic alarm
- Auxiliary contacts of main presence and end of charge
(Standard Charger) or of air pump control and end of charge
(Charger with air pump) - Cooling: forced
- Case: Metal base, cover in self-extinguishable PST
- Size: 430 x 220 x 110 mm
- Weight: 5,5 kg
- Enclosure class: IP20
- In conformity with the requirements of the Low
Voltage Directive and of the Directive EMC.
Main charging curves
More and different charging curves are available for special batteries
and non-standard applications.
Accessories NG3 – Battery Charger single-phase
cod. P14004 – 300 cm KIT LED EXTENSION d 10, – Displays the charging phase of the Charger (fixing hole d 14mm). |
cod. P13003 – 200 cm cod. P13007 – 400 cm REMOTE INDICATOR d 20, – Displays the Charging phase of the Charger (fixing hole d 22 mm). |
cod. P13005 – 200 cm cod. P13013 – 500 cm (standard) cod. P13005A – 10 m THERMAL SENSOR – Controls the constant voltage of the gasification phase, depending on the battery temperature. |
cod. P13004 – 200 cm cod. P13004A – 10 m THERMAL SENSOR AND REMOTE INDICATOR d 20, (fixing hole d 22 mm). |
cod. P14000 CABLES PASSAGE BEARING – Allows an appropriate wall installation, thanks to an adequate passage of the cables behind the Charger. |
cod. P14009 – 200 cm THERMAL SENSOR AND LED INDICATOR d 10, (fixing hole d 14 mm). |
Reviews
There are no reviews yet.